TESEVO 6.2'' Dashboard Screen Display for Model 3 Highland/Model Y

SPECIFICATION

Product Name:  TESEVO 6.2'' Dashboard Screen Display for Model 3 Highland / Model Y
Compatible: Model 3 Highland (2024-Present) & Model 3 (2017-2023) & Model Y (2020-2024)
Display: 6.2 inch LCD
Compatible system: If you choose the Carplay version, it is supported for Apple Caplay and Android auto. If you choose the version without Carplay, it supports Apple Caplay and Hicar.

NOTE

Current speed display (KM/H or MPH）
Battery usage
Time in 12H and 24H
Front trunk status： open /close
Left front door status： open/close
Right front door status： open /close
Left rear door status： open /close
Right rear door status： open /close
Left turn signal/Right turn signal
Car color selection
Fog lamps indication
Blind Spot Indication
Autopilot status lights
Outside temp
High beam/position light/Low beam Indicator
Gear display
Handbrake Reminder
Seat belt Indicator
Tyre pressure gauge
2 User Interfaces to choose from
Vehicle distance indicator
Seat Belt Indicator
Power Usage Beam
US Road Signs
Brightness adjustments following the car screen
Day & Night mode
Over-the-air updates
Wide language support options
Carplay Option
Touch Screen: Model 3 Highland, Model 3, and Model Y with carplay all have touchscreens.
Forward Blind Spot Camera OPTION: Model 3 Highland, Model 3, and Model Y with carplay can be equipped with forward blind spot cameras.

Q1 - What to do if Tesla screen is black? (Screen Installed but Not Lighting Up)

Reason 1: Other factors causing abnormal operation of the microprocessor
Solution 1: Restart the key.

Reason 2: The main unit plug was disconnected and not reconnected within 5 minutes.
Solution 2: Reconnect the wiring harness, lock the car for 2 hours, keep the phone and remote key more than 20 meters away from the car, and check if the screen can light up after 2 hours.

Reason 3: The main unit or screen plug is not securely connected.
Solution 3: Reconnect the main unit plug.

Q2 - Why does the screen start up but no display？

Reason: Backend data error.
Solution: Reconnect the main unit plug.

Q3 - Why is the screen display out of sync or not displaying the original car information?

Reason: Power and protocol lines are not connected.
Solution: Reconnect and inspect the wiring interfaces.

Q4 - How to switch between day and night mode?
A4 - Push and hold the right scroll wheel to the right for 3 seconds to access the settings menu > Set to the desired brightness