TESEVO Full 8pcs set Window Sunshades for Model Y Juniper
Secure payment options
▶ Click to watch how to install the Full 8 pcs Window Sunshade
TESEVO Full 8pcs set Window Sunshades for Model Y Juniper
8-Piece Suction-Cup Window Sunshades for Tesla Model Y
Turn a sunny parking stop into a more comfortable break. These opaque window shades cut down incoming light so you can settle in while charging or resting at a campsite. Choose the eight-piece set for your Model Y, then put it up when you stop and take it down when you are ready to go.
Find your fit
- Tesla Model Y 2020-Present
Make more of every stop
Block the bright light. Settle in. Get back on the road when you are ready.

Do Not Block the Driver’s View
The sunshade at the main and passenger windows can be folded to reserve a viewing window without affecting driving visibility. The sunshade and the window are independent of each other, and the window can be raised or lowered at any time..

Keep your downtime to yourself
Changing after a hike or settling in at a campsite? Cover the windows to help shield the cabin from passing eyes. The opaque design gives you a visual barrier when you would rather not feel on display.

Shade when you need it
Your plans change, and your window coverage can too. Suction cups let you attach the shades to the glass for a parked break and remove them afterward. You get temporary coverage without committing to a permanent window treatment.

Provide Effective UV Protection
Model Y sunshade protects the interior of your vehicle to the maximum extent, blocking large amounts of sunlight and harmful ultraviolet rays, reducing interior aging and cracking caused by direct sunlight.
Product details
A closer look at your selected eight-piece set.
Specifications
- Shade designOpaque privacy panels
- MountingSuction cups
- MaterialAluminum foil
- Set size8 shade panels
Installation & use
Attach the suction cups first. Fit the front shade from the bottom up and the rear shade from the top down.
Attach the suction cups
Insert the suction cups and nuts into the corresponding holes on each shade. Make sure the nuts face inward toward the cabin and the suction cups face outward toward the window glass.
Fit the front-window shade
Align the shade with the window frame and gently insert the bottom edge first. Carefully position the rest of the shade, then lightly press each suction cup against the glass until it attaches securely. No excessive pressure is needed.
Fit the rear-window shade
Follow the same suction cup setup as the front shade. Gently insert the top edge first, then guide the bottom edge into position. Adjust the shade edges as needed to cover any gaps where light may enter, and lightly press the suction cups against the glass to secure them.
Remove the shade
Gently press down on the nut and pull it back to release the suction cup from the glass. Release all remaining suction cups before carefully removing the shade.
Mirror-view opening: Fold back the front half of the shade, then tuck in its bottom corner to hold it open. This opens a section for checking the mirror; it does not guarantee a fully unobstructed view. Remove the shades before driving and check that your windows and mirrors are clear.
Frequently asked questions
Are these see-through mesh shades?
No. These panels are opaque, not see-through mesh. They block the view through the covered glass as well as incoming light, so use them while parked and remove them before driving.
Can I leave the shades installed while driving?
Use these shades while parked. Remove them before driving and make sure your view through the windows and mirrors is clear.
Do the shades need permanent mounting?
The shades attach to the glass with suction cups and can be removed after use. They are a temporary window covering, not a permanent window treatment.
Real feedback from the TESEVO community